Heavy‑Duty M‑Series Conveyor Chains | Carbon Steel cum Annexos

Conveyor VinculaM Series）M20/M28/M40/M56

M‑Series Conveyor Vincula (M20/M28/M40/M56) metrica, gravia cylindrus catenis obsecundantia cum ISO 1977/DIN 8167, modulari cylindrus / virgultorum plumarum optiones, attachiamenta customizabilia, et stannum chalybs calefacti constructio pro mole materiali tractatu, materia processui et industriae invehendi; vires librant, resistentiam gerunt, et permutabilitatem pro medio-to-gravibus oneribus.

ISO     Chain No.	Pix								Rollerus     Diameter			Frutex     diameter
ISO     Cadena No	Paso								Diametro     rodillo			Diametro     casquillo
	P								d1     max	d7     max	d5     max	d4     max
	mm								mm	mm	mm	mm
M20	40.0	50.0	63.0	80.0	100.0	125.0	160.0		25.0	12.5	32.0	9.0
M28	50.0	63.0	80.0	100.0	125.0	160.0	200.0		30.0	15.0	36.0	10.0
M40	63.0	80.0	100.0	125.0	160.0	200.0	250.0		36.0	18.0	42.0	12.5
M56	63.0	80.0	100.0	125.0	160.0	200.0	250.0		42.0	21.0	50.0	15.0
M80	80.0	100.0	125.0	160.0	200.0	250.0	315.0		50.0	25.0	60.0	18.0
M112	80.0	100.0	125.0	160.0	200.0	250.0	315.0	400.0	60.0	30.0	70.0	21.0
M160	100.0	125.0	160.0	200.0	250.0	315.0	400.0	500.0	70.0	36.0	85.0	25.0
M224	125.0	160.0	200.0	250.0	315.0	400.0	500.0	630.0	85.0	42.0	100.0	30.0
M315	160.0	200.0	250.0	315.0	400.0	500.0	630.0		100.0	50.0	120.0	36.0
M450	200.0	250.0	315.0	400.0	500.0	630.0	800.0		120.0	60.0	140.0	42.0

ISO     Chain No.	Latitudo     inter     laminas interiores	Pin     diameter	Pin longitudo	Altitudo lamina	Plate crassitudo	Ultima     distrahentes     vires	Mediocris     distrahentes     vires
ISO     Cadena No	Ancho     interior	Diametro     pasador	Longitud     pasador	Altura     placas	Ancho     placas	Resis.     rotura	Resis.     media     tracción
	b1     min	dz     max	L     max	h2     max	T	Q     min	Q
	mm	mm	mm	mm	mm	kN/LB	KN
M20	16.0	6.0	35.0	19.0	2.5	20.0/4545	25.0
M28	18.0	7.0	40.0	21.0	3.0	28.0/6364	35.0
M40	20.0	8.5	45.0	26.0	3.5	40.0/9091	50.0
M56	24.0	10.0	52.0	31.0	4.0	56.0/12727	70.0
M80	28.0	12.0	62.0	36.0	5.0	80.0/18182	100.0
M112	32.0	15.0	73.0	41.0	6.0	112.0/25454	140.0
M160	37.0	18.0	85.0	51.0	7.0	160.0/36364	200.0
M224	43.0	21.0	98.0	62.0	8.0	224.0/50909	280.0
M315	48.0	25.0	112.0	72.0	10.0	315.0/71591	393.7
M450	56.0	30.0	135.0	82.0	12.0	450.0/102272	562.5

DIN     Chain No.	Pix							Rollerus     Diameter			Frutex     diameter
DIN     Cadena No	Paso							Diametro     rodillo			Diametro     casquillo
	P							d1     max	d7     max	ds     max	d4     max
	mm							mm	mm	mm	mm
M20	40.0	50.0	63.0	80.0	100.0	125.0	160.0	25.0	12.50	30.00	9.0
M28	50.0	63.0	80.0	100.0	125.0	160.0	200.0	30.0	15.00	36.00	10.0
M40	63.0	80.0	100.0	125.0	160.0	200.0	250.0	36.0	18.00	42.00	12.5
M56	63.0	80.0	100.0	125.0	160.0	200.0	250.0	42.0	21.00	50.00	15.0
M80	80.0	100.0	125.0	160.0	200.0	250.0	315.0	50.0	25.00	60.00	18.0
M112	80.0	100.0	125.0	160.0	200.0	250.0	315.0	60.0	30.00	70.00	21.0
M160	100.0	125.0	160.0	200.0	250.0	315.0	400.0	70.0	36.00	85.00	25.0
M224	125.0	160.0	200.0	250.0	315.0	400.0	500.0	85.0	42.00	100.00	30.0
M315	160.0	200.0	250.0	315.0	400.0	500.0	630.0	100.0	50.00	120.00	36.0
M450	200.0	250.0	315.0	400.0	500.0	630.0	800.0	120.0	60.00	140.00	42.0

DIN     Chain No.	Latitudo     inter     laminas interiores	Pin     diameter	Pin longitudo	Altitudo lamina	Plate crassitudo	Ultima     distrahentes     vires	Mediocris     distrahentes     vires
DIN     Cadena No	Ancho     interior	Diametro     pasador	Longitud     pasador	Altura     placas	Ancho     placas	Resis.     rotura	Resis.     media     traccón
	b1     min	d2     max	L     max	h2     max	T	Q     min	Q
	mm	mm	mm	mm	mm	KN/LB	kN
M20	16.0	6.0	35.0	18.0	2.5	20.0/4545	25.0
M28	18.0	7.0	40.0	20.0	3.0	28.0/6364	35.0
M40	20.0	8.5	45.0	25.0	3.5	40.0/9091	50.0
M56	24.0	10.0	52.0	30.0	4.0	56.0/12727	70.0
M80	28.0	12.0	62.0	35.0	5.0	80.0/18182	100.0
M112	32.0	15.0	73.0	40.0	6.0	112.0/25454	140.0
M160	37.0	18.0	85.0	50.0	7.0	160.0/36364	200.0
M224	43.0	21.0	98.0	60.0	8.0	224.0/50909	280.0
M315	48.0	25.0	112.0	70.0	10.0	315.0/71591	393.7
M450	56.0	30.0	135.0	80.0	12.0	450.0/102272	562.5

Roller & configurationis Options

• Types cylindro:

• A (Bush Only): nulla cylindrus; pro low celeritate, summus onus trahat applicationes.

• B (Small Roller) : Latin for general importans.

• C (Large Roller): pressura contactus reducitur pro superficiebus inaequalibus.

• D (Flanged Rollerus): Ne longi TRADUCTOR lateralis summa.

• Communia Annexos:

• A1/A2: paxillos extensos ad fugam adscendens.

• C1/C3: laminis plena longitudo ferebat pro retentione mole.

• W1/W2: iuncta strigiles systemata reti.

• K1/K2: lugs cinguli ad latus loading.

---

Key euismod & Features

1. Fortitudo & Durabilitas: Per duram offensionem ferro inductione indurata fibulae / frutices; rated per continua gravia et laesura ambitus.

2. Flexibilitas modularis: Multiplex picis / cylindrus iuncturas ut layout et onere par; field‑reparable with standard tools.

3. Standard Obsequium: ISO 1977/DIN 8167 mutabilitatem praestat; faciem duros welding on wear superficies minimizes friction.

4. Environmental Adaptability: Operating temp: −20°C ad + 120°C; finitur includunt ceroma, oxydatum nigrum, zinciplatum, vel calidum foveatum ad resistentiam lenis corrosionis.

---

Application missiones

• Primaria: Sawmill, pulpa/paper, grani tractatio, fodienda aggregatio, vastitas administratio.

• Secundarium: Traductiones Chip, lineas trahentes, elevatores situlae, lineae conventus gravis officio.

• Limitationes: Non propter celeritatem virtutis tradendae (>1.0 m/s); vitare fortis acida / alkalies (usum variantes immaculatam ferro, si opus fuerit).

---

Electio & Sustentacionem pretium

1. Load & Speed: Computa static/dynamica onera cum factore ≥4; max celeritas ≤0.8 m/s pro drag/veutore usui est.

2. Sprocket & Tension: Utere ISO‑ obsequentis sprockets (min 17 dentes); ponere tensio ad 1-2% of centrum spatium.

3. Tutela: relubricate fibulas / bushings biweekly (summo temp uncto pro ≥80°C); inspicere attachiamenta menstrua pro rimas / conterentes.