Cakɛda minnu bɛ taa ni fɛnw ye M‐Series ye | Carbon Steel ni Attachments (Jɛkulu minnu bɛ fɛnw siri).

Cakɛda minnu bɛ taa ni fɛnw ye (M Series)M20/M28/M40/M56

M‐Series Conveyor Chains (M20/M28/M40/M56) ye mɛtɛrɛ, cakɛda gɛlɛnw ye minnu bɛ baara kɛ ni ISO 1977/DIN 8167 ye, minnu bɛ ni modulu roller/bushing sugandiliw ye, fɛn minnu bɛ se ka siri ka kɛɲɛ ni mɔgɔw sago ye, ani nɛgɛso jɔli min bɛ kɛ ni funteni ye walasa ka fɛn caman minɛ, ka yiriw baara, ani ka izini kɛ ka fɛnw lase; u bɛ fanga, sɛgɛnbaliya, ani ɲɔgɔn falen-falen bɛnkan don doni cɛmancɛw ni doni gɛlɛnw na.

ISO     Cakɛda No.	Kɛnɛjɛ								Roller diamètre (kurunba     diamètre).			Bush     cɛmancɛ la
ISO     Kadena No	Paso jamana na								Diámetro     rodillo ye			Diámetro     kasɛti
	P								d1     maksimali	d7     maksimali	d5     maksimali	d4     maksimali
	mm								mm	mm	mm	mm
M20	40.0	50.0	63.0	80.0	100.0	125.0	160.0		25.0	12.5	32.0	9.0
M28	50.0	63.0	80.0	100.0	125.0	160.0	200.0		30.0	15.0	36.0	10.0
M40	63.0	80.0	100.0	125.0	160.0	200.0	250.0		36.0	18.0	42.0	12.5
M56	63.0	80.0	100.0	125.0	160.0	200.0	250.0		42.0	21.0	50.0	15.0
M80	80.0	100.0	125.0	160.0	200.0	250.0	315.0		50.0	25.0	60.0	18.0
M112	80.0	100.0	125.0	160.0	200.0	250.0	315.0	400.0	60.0	30.0	70.0	21.0
M160 ye	100.0	125.0	160.0	200.0	250.0	315.0	400.0	500.0	70.0	36.0	85.0	25.0
M224 ye	125.0	160.0	200.0	250.0	315.0	400.0	500.0	630.0	85.0	42.0	100.0	30.0
M315 ye	160.0	200.0	250.0	315.0	400.0	500.0	630.0		100.0	50.0	120.0	36.0
M450 ye	200.0	250.0	315.0	400.0	500.0	630.0	800.0		120.0	60.0	140.0	42.0

ISO     Cakɛda No.	cɛ bonya     ni ɲɔgɔn     Kɔnɔna tabali	Pin     diamètre (bololanɛgɛ) .	Pin janya	Plate jugumanba	Plate (plati) janya	A laban na,     a bɛ se ka wuli ka bɔ     a nɔ na	hakɛ danmadɔ     Sɛgɛsɛgɛli     fanga
ISO     Kadena No	Ancho     kɔnɔna na	Diámetro     pasador ka baara	Longitud     pasador ye	Altura     ka plakaw	Ancho     placas ye	Resis (Resis) ye.     rotura (rotura) ye	Resis (Resis) ye.     kunnafonidilaw     ka tracción
	b1     min	dz     max	L     max	h2     max	T	Q     min	Q
	mm	mm	mm	mm	mm	kN/LB ye	KN
M20	16.0	6.0	35.0	19.0	2.5	20,0/4545 ye	25.0
M28	18.0	7.0	40.0	21.0	3.0	28,0/6364 ye	35.0
M40	20.0	8.5	45.0	26.0	3.5	40,0/9091 ye	50.0
M56	24.0	10.0	52.0	31.0	4.0	56,0/12727 ye	70.0
M80	28.0	12.0	62.0	36.0	5.0	80,0/18182. Bamako, Mali	100.0
M112	32.0	15.0	73.0	41.0	6.0	112,0/25454 ye	140.0
M160 ye	37.0	18.0	85.0	51.0	7.0	160,0/36364 ye	200.0
M224 ye	43.0	21.0	98.0	62.0	8.0	224,0/50909 ye	280.0
M315 ye	48.0	25.0	112.0	72.0	10.0	315,0/71591 ye	393.7
M450 ye	56.0	30.0	135.0	82.0	12.0	450,0/102272 ye	562.5

DIN     Cakɛda No.	Kɛnɛjɛ							Roller diamètre (kurunba     diamètre).			Bush     cɛmancɛ la
DIN     Kadena No	Paso jamana na							Diámetro     rodillo ye			Diámetro     kasɛti
	P							d1     maksimali	d7     maksimali	ds     max	d4     maksimali
	mm							mm	mm	mm	mm
M20	40.0	50.0	63.0	80.0	100.0	125.0	160.0	25.0	12.50	30.00	9.0
M28	50.0	63.0	80.0	100.0	125.0	160.0	200.0	30.0	15.00	36.00	10.0
M40	63.0	80.0	100.0	125.0	160.0	200.0	250.0	36.0	18.00	42.00	12.5
M56	63.0	80.0	100.0	125.0	160.0	200.0	250.0	42.0	21.00	50.00	15.0
M80	80.0	100.0	125.0	160.0	200.0	250.0	315.0	50.0	25.00	60.00	18.0
M112	80.0	100.0	125.0	160.0	200.0	250.0	315.0	60.0	30.00	70.00	21.0
M160 ye	100.0	125.0	160.0	200.0	250.0	315.0	400.0	70.0	36.00	85.00	25.0
M224 ye	125.0	160.0	200.0	250.0	315.0	400.0	500.0	85.0	42.00	100.00	30.0
M315 ye	160.0	200.0	250.0	315.0	400.0	500.0	630.0	100.0	50.00	120.00	36.0
M450 ye	200.0	250.0	315.0	400.0	500.0	630.0	800.0	120.0	60.00	140.00	42.0

DIN     Cakɛda No..	cɛ bonya     ni ɲɔgɔn     Kɔnɔna tabali	Pin     diamètre (bololanɛgɛ) .	Pin janya	Plate jugumanba	Plate (plati) janya	A laban na,     a bɛ se ka wuli ka bɔ     a nɔ na	hakɛ danmadɔ     Sɛgɛsɛgɛli     fanga
DIN     Kadena No	Ancho     kɔnɔna na	Diametro     pasador ye	Longitud     pasador ye	Altura     ka plakaw	Ancho     placas ye	Resis (Resis) ye.     rotura (rotura) ye	Resis (Resis) ye.     kunnafonidilanw     traccón
	b1     min	d2     maksimali	L     max	h2     max	T	Q     min	Q
	mm	mm	mm	mm	mm	KN/LB ye	kN
M20	16.0	6.0	35.0	18.0	2.5	20,0/4545 ye	25.0
M28	18.0	7.0	40.0	20.0	3.0	28,0/6364 ye	35.0
M40	20.0	8.5	45.0	25.0	3.5	40,0/9091 ye	50.0
M56	24.0	10.0	52.0	30.0	4.0	56,0/12727 ye	70.0
M80	28.0	12.0	62.0	35.0	5.0	80,0/18182. Bamako, Mali	100.0
M112	32.0	15.0	73.0	40.0	6.0	112,0/25454 ye	140.0
M160 ye	37.0	18.0	85.0	50.0	7.0	160,0/36364 ye	200.0
M224 ye	43.0	21.0	98.0	60.0	8.0	224,0/50909 ye	280.0
M315 ye	48.0	25.0	112.0	70.0	10.0	315,0/71591 ye	393.7
M450 ye	56.0	30.0	135.0	80.0	12.0	450,0/102272 ye	562.5

Roller & Configuration Sugandiliw

• Roller suguyaw:

• A (Bush Dɔrɔn): Rulo tɛ yen; ka ɲɛsin teliya dɔgɔman, doni caman samali baarakɛminɛnw ma.

• B (Small Roller): Sariya min bɛ kɛ ka fɛnw lase mɔgɔw bɛɛ ma.

• C (Roller belebele): A bɛ dɔgɔya ka ɲɛsin fɛnw ma minnu tɛ kelen ye.

• D (Flanged Roller): A bɛ kɛrɛfɛla jiginni bali conveyor janw kan.

• Fɛn minnu bɛ tali kɛ ɲɔgɔn na tuma caman na:

• A1/A2: Pinɛ janyalenw ka ɲɛsin wuluwulu jiginni ma.

• C1/C3: Taamaʃyɛnw janya dafalenw walasa ka fɛn caman mara.

• W1/W2: Scrapers weldalenw ka ɲɛsin drag systems ma.

• K1/K2: Offset lugs ka kɛ kɛrɛfɛ doni ye.

---

Baarakɛcogo kunbabaw & Fɛn minnu bɛ kɛ

1. Fanga & Muɲuli: Nɛgɛ min bɛ kɛ ni nɛgɛ ye min gɛlɛyara ni induction‐hardened pins/bushings ye; jate kɛra doni girinmanw ni sigida minnu bɛ sɔgɔsɔgɔ tuma bɛɛ.

2. Modular Flexibility: Pitch/roller caman faralen ɲɔgɔn kan walasa ka bɛn layidu ni doni ma; foro‐labɛnni ni baarakɛminɛnw ye minnu bɛ kɛ ka kɛɲɛ ni sariya ye.

3. Sariyasenw labatoli : ISO 1977/DIN 8167 bɛ fɛnw falenfalenni sabati ; ɲɛda gɛlɛnw sɔgɔli fɛnw kan minnu bɛ sɛgɛn, o bɛ dɔ bɔ ɲɔgɔnkanu na.

4. Lamini ladamuni: Baarakɛyɔrɔ funteni: −20°C fo +120°C; finiw ye tulu ye, ɔkisizɛni nɛrɛma, zinki‐platilen, walima ni funteni‐jilama galvanize ye walasa ka sɔgɔsɔgɔninjɛ nɔgɔman kɛlɛ.

---

Baara kɛcogo ɲɛfɔcogo

• Fɔlɔ : Tigɛminɛnw, shɔ/paper, suman minɛcogo, sɛnɛfɛnw sɛnɛcogo, nɔgɔw ladonni.

• Filanan : Chip conveyors, drag lines, bucket elevators, baara gɛlɛnw lajɛlenw.

• Danyɔrɔw : A tɛ kɛ fanga cili teliya la (>1,0 m/s); aw bɛ aw yɛrɛ tanga asidi/alkali barikamaw ma (aw bɛ nɛgɛ suguya wɛrɛw kɛ ni aw mago bɛ a la).

---

Sugandili & Ladonni Ladilikanw

1. Load & Speed: Aw bɛ doni jɔlenw/daɲɛw jate ni lakana hakɛ ≥4 ye; teliyaba ≤0,8 m/s ka ɲɛsin drag/conveyor baara ma.

2. Sprocket & Tension: Aw bɛ baara kɛ ni ISO‐compliant sprockets ye (min 17 ɲinw); ka tension mara 1–2% la cɛmancɛ yɔrɔjan na.

3. Ladonni : Aw bɛ segin ka tulu kɛ pinɛw/busiw la dɔgɔkun fila o dɔgɔkun fila (gɛrɛsi min ka bon ni ≥80°C ye); aw bɛ fɛn minnu bɛ fara ɲɔgɔn kan, aw bɛ olu sɛgɛsɛgɛ kalo o kalo ni u farala/sɛgɛn tɛ.